Product Details:
Minimum Order Quantity | 1 Piece |
Usage/Application | SPOT, PROJECTION WELDING FOR SHEET METAL |
Model Name/Number | RWC10 |
Voltage | 415 VAC |
Frequency | 50 HZ |
Display Type | SEVEN SEGMENT |
Product Details:
Minimum Order Quantity | 1 Piece |
Usage/Application | SPOT, PROJECTION, SEAM WELDING |
Model Name/Number | MFDC |
Voltage | 415 VAC |
Frequency | 50 Hz |
Display Type | LCD |
Product Details:
Minimum Order Quantity | 1 Piece |
Usage/Application | It uses spot welding on sheet metal, nut / projection welding,It also use for seam welding |
Model Name/Number | MFAC WELDING CONTROL |
Voltage | 415 VAC |
Frequency | 50 Hz |
Country of Origin | Made in India |
Application | USE FOR SPOT, PROJECTION, SEAM TO SHEET METAL COMPONENT |
Product Details:
Minimum Order Quantity | 1 Piece |
Usage/Application | SPOT AND PROJECTION |
Model Name/Number | RWC40 |
Voltage | 415 VAC V |
Frequency | 50 HZ |
Display Type | SEVEN SEGMENT |
Product Details:
Minimum Order Quantity | 1 Piece |
Usage/Application | Radiator panel welding, Fuel tank welding, Barrel, MS/ SS container, Solar tank welding |
Frequency | 50 Hz |
Display Type | SEVEN SEGMENT |
Memory Retention | EEPROM |
Power Source | 415 VAC |
Application | SEAM |
Product Details:
Model Name/Number | WELCOM II |
Usage/Application | It uses spot welding on sheet metal, nut / projection welding,etc |
Brand | CHOWEL |
Voltage | 220 VAC /415 VAC |
Frequency | 50/60 Hz |
Features | AC resistance welding controller based on microcomputer. |
Capacity | Pune |
Control Name: WELCOM II AC Welding Control with Secondary and primary feedback for Spot, Projection Welding Machine.
FEATURES
1. AC resistance welding controller based on microcomputer.
2. LED display for welding current, welding parameter.
3. It can memorize 15 different materials and thickness of the work piece as welding specification.
4. Paragraph 3 is energized mode, a current ramp slow down function.
5. The use of primary, secondary constant control mode, the power supply voltage variation. Compensation method guaranteed provides a stable welding current.
6. It has a current monitoring, power angle monitoring.
7. It has two gun valve selections.
8. Accuracy: constant current feedback current
a) Within +/-2% against a +/- 10% welding source fluctuation.
b) Within +/-2% against a +/- 10% resistive load fluctuation.
c) Within +/-2% against a +/- 10% Inductive load fluctuation.
9. Steeper function available.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Usage/Application | Barrel welding, Drum Welding, Two and four Wheeler Fuel tank welding |
Model Name/Number | WELCOM 650P |
Output Current | 600 (A) |
Voltage | 220 VAC /415 VAC |
Packaging Type | Standard |
Frequency | 50/60 Hz |
Country of Origin | Made in India |
Control Name: AC Welding Control With secondary and primary feedback for Seam welding machine
FEATURES
1. AC resistance welding controller based on microcomputer.
2. LCD display welding current, welding specification numbers set time.
3. It can memorize 31 different materials and thickness of the work piece welding specification.
4. A change possible each other to sequence progess faction 3 kinds welding condition.
5. The use of primary, secondary constant control mode, the power supply voltage variation. Compensation method guaranteed provides a stable welding current.
6. In seam mode, a soft welding start from an every kind slope function.
7. The fastest response for the roll spot welding ( the max 1 cycle within welding after the input).
8. An every kind monitors and fault detection function.
9. The alarm bell is active when the fault happens.